Using The Auto Paper Selection Function - Kodak 3000DSV Operator's Manual

Selecting the paper
size
Using the Auto Paper
Selection function
A-61371 April 2003
Press the Paper Selection key to select the desired print size. The
system cycles through the available sizes each time you press the key.
When the Paper Feeding Tray is loaded with 8 1/2 x 11" (A4) paper and
the paper cassette is loaded with 11 x 17" (A3) paper, this function can
be used to automatically select the appropriate size of paper for the
current job.
• Press the Paper Selection key so both the 11 x 17" (A3) and the
8 1/2 x 11" (A4) LEDs light up.
The system automatically detects the image area and prints on
8 1/2 x 11" (A4) paper for half-size film and on 11 x 17" (A3) paper for
full-size film.
NOTES:
• The Auto Paper Selection function can only be used for a
combination of 11 x 17" (A3) and 8 1/2 x 11" (A4) paper sizes. The
Page-by-Page function cannot be selected when the Auto Paper
Selection capability is being used.
• When a 7.5x lens is being used, the Auto Paper Selection function
cannot use 11 x 17" (A3) size paper because of the size of the image
area.
• When Masking or Trimming has been previously selected, the
system selects 8 1/2 x 11" (A4) if the defined area is less than 8 1/2 x
11" (A4) size and 11 x 17" (A3) for all other print jobs.
3-7