Using The Cycle Print Mode - Kodak 3000DSV Operator's Manual

Using the Cycle Print
Mode
A-61371 April 2003
Centering
• Press the Centering/Fit key to turn on Centering.
NOTE: Centering/Fit mode cannot be used if Masking is selected.
Fit
• Press the Centering/Fit key to turn on Fit.
NOTE: Fit mode cannot be used when the scanner is connected to the
PC.
This function automatically scans the next image following a preset
period of time. Images are manually loaded on the carrier glass in
between cycles.
This is a system setting that must be entered by an Kodak Service
Representative.
If you want to use the Cycle Print Mode, ask your Kodak
Representative to make the necessary system setting, then you can
perform the following functions.
3-15