Product Descripton; Installation - Kodak 3000DSV Operator's Manual

Product description

Installation

1-2
The Kodak 3000DSV Digital Scanner-Printer scans images and outputs
to the Video Laser Printer through the optional PC interface. The
3000DSV Scanner is ideal for medium-high volume scanning of all
formats of media from microfiche, jackets, aperture cards, 16 and 35
mm roll film and 16 mm M and ANSI cartridges.
Placement of the unit in the environment described below will ensure
optimal performance throughout the long life of service for which it was
designed.
• A well-ventilated place.
• An area which is free from ammonia or other organic gases.
• A place which has easy access to a power outlet so that the unit may
be easily plugged in and unplugged.
• Any area free from direct sunlight.
• A place which is out of the direct air stream of an air conditioner,
heater or ventilator and is not subject to extremely high or low
temperatures or humidity.
• A stable location with a flat surface that is not subject to undue
vibration.
• A place that is free from any object that would block the heat exhaust
duct of the printer.
• A place away from curtains or anything else that is easily flammable.
• An area that is safe from spilled water or other liquids.
• A dust-free location.
NOTE: If the scanner is located near a window, do not face the screen
towards the window.
A-61371 April 2003