Genie GTH-636 Service Manual page 36

Section 3 • Scheduled Maintenance Procedures
MAINTENANCE INSPECTION REPORT
Model
Serial number
Date
Hour meter
Machine owner
Inspected by (print)
Inspector signature
Inspector title
Inspector company
Instructions
· Make copies of this report to use for
each inspection.
· Select the appropriate checklist(s) for
the type of inspection to be
performed.
Daily or 8 hour
Inspection:
Quarterly or 250 hour
Inspection:
Semi-annually or 500 hour
Inspection:
Annually or 1000 hour
Inspection:
2 Year or 2000 hour
Inspection: A+B+C+D+E
· Place a check in the appropriate box
after each inspection procedure is
completed.
· Use the step-by-step procedures in
this section to learn how to perform
these inspections.
· If any inspection receives an "N", tag
and remove the machine from service,
repair and re-inspect it. After repair,
place a check in the "R" box.
Legend
Y = yes, acceptable
N = no, remove from service
R = repaired
3 - 6 GTH-636 • GTH-644 • GTH-842 • GTH-844 • GTH-1048 • GTH-1056
Checklist D - Rev B
D-1 Forks
D-2 Sequencing chains
D-3 Hydraulic return filter
D-4 Engine maintenance -
Deutz models
D-5 Transmission
D-6 Axle maintenance
D-7 Engine maintenance -
Perkins models
Perform every 1500 hours:
D-8 Engine maintenance -
Deutz models
A
Comments
A+B
A+B+C
A+B+C+D
Checklist E - Rev C
Y N R
E-1 Hydraulic oil
E-2 Engine maintenance -
John Deere models
E-3 Engine maintenance -
Perkins models
Perform every 3000 hours:
E-4 Engine maintenance -
Perkins models
Perform every 4000 hours:
E-5 Engine maintenance -
Perkins models
Perform every 4500 hours:
E-6 Engine maintenance -
John Deere models
Perform every 6000 hours:
E-7 Engine maintenance -
Perkins models
Perform every 12,000 hours:
E-8 Engine maintenance -
Deutz models
E-9 Engine maintenance -
Perkins models
June 2007
Y N R
Part No. 97487