Perform Axle Maintenance; Perform Engine Maintenance - John Deere Models; And Gth-844 Models - Genie GTH-636 Service Manual

Section 3 • Scheduled Maintenance Procedures
CHECKLIST A PROCEDURES
A-11

Perform Axle Maintenance

Note: Axle specifications require that this
procedure be performed every 50 hours or
monthly, whichever comes first.
GTH-636, GTH-644, GTH-842 and GTH-844:
Required maintenance procedures and additional
axle information is available in the
Dana 212 Axle Maintenance and Repair Manual
(Dana part number 0247).
Dana 212 Axle Maintenance and Repair Manual
Genie part number
GTH-1048 and GTH-1056:
Required maintenance procedures and additional
axle information is available in the
Dana 213 Axle Maintenance and Repair Manual
(Dana part number 0243).
Dana 213 Axle Maintenance and Repair Manual
Genie part number
3 - 14 GTH-636 • GTH-644 • GTH-842 • GTH-844 • GTH-1048 • GTH-1056
A-12
Perform Engine Maintenance -
John Deere Models
Note: Engine specifications requires that this one-
time procedure be performed after 100 hours of
operation.
Required maintenance procedures and additional
engine information is available in the
John Deere 4045T270 Operator's Manual
(John Deere part number OMRG25204) OR the
John Deere 4045T275 Operator's Manual
(John Deere part number OMRG33324).
97488
John Deere 4045T270 Operator's Manual
Genie part number
John Deere 4045T275 Operator's Manual
Genie part number
115026
June 2007
REV C
97492
108444
Part No. 97487