Introduction - Genie GTH-636 Service Manual

Introduction

Introduction
Important
Read, understand and obey the safety rules and
operating instructions in the appropriate Operator's
Manual on your machine before attempting any
maintenance or repair procedure.
This manual provides detailed scheduled
maintenance information for the machine owner
and user. It also provides troubleshooting and
repair procedures for qualified service
professionals.
Basic mechanical, hydraulic and electrical
skills are required to perform most procedures.
However ,several procedures require specialized
skills, tools, lifting equipment and a suitable
workshop. In these instances, we strongly
recommend that maintenance and repair be
performed at an authorized Genie dealer
service center.
Technical Publications
Genie Industries has endeavored to deliver the
highest degree of accuracy possible. However,
continuous improvement of our products is a Genie
policy. Therefore, product specifications are
subject to change without notice.
Readers are encouraged to notify Genie of errors
and send in suggestions for improvement. All
communications will be carefully considered for
future printings of this and all other manuals.
Contact Us:
PO Box 97030
Redmond, WA 98073-9730 USA
www.genieindustries.com
e-mail: techsup@genieind.com
GTH-636 • GTH-644 • GTH-842 • GTH-844 • GTH-1048 • GTH-1056
ii
Copyright © 2006 by Genie Industries
97487 Rev D June 2007
First Edition, Fourth Printing
"Genie" is a registered trademark of Genie
Industries in the USA and many other countries.
"GTH" is a trademark of Genie Industries.
Printed on recycled paper
Printed in U.S.A.
June 2007
Part No. 97487