Sway Manifold Components - Genie GTH-636 Service Manual

Section 4 • Repair Procedures
MANIFOLDS
7-11

Sway Manifold Components

The sway manifolds are located under an inspection cover on the front axle support bulkhead with the left
sway manifold mounted on the cab side of the machine and the right sway manifold mounted on the
exhaust side of the machine.
Index
No. Description
1 Check valve, pilot operated .............. KA .......... Left front cylinder extend circuit ........ 30-35 ft-lbs / 40-47 Nm
2 Check valve, pilot operated .............. KB .......... Left front cylinder retract circuit ......... 30-35 ft-lbs / 40-47 Nm
3 Check valve, pilot operated ............. KC .......... Right front cylinder retract circuit ...... 30-35 ft-lbs / 40-47 Nm
4 Check valve, pilot operated ............. KD .......... Right front cylinder extend circuit ..... 30-35 ft-lbs / 40-47 Nm
KB
2
1
KA
Note: 'alpha' callouts refer
to corresponding notes on
the hydraulic schematic
4 - 58 GTH-636 • GTH-644 • GTH-842 • GTH-844 • GTH-1048 • GTH-1056
Schematic
Item Function
CAB SIDE
Torque
KC
KD
EXHAUST SIDE
June 2007
REV C
3
4
Part No. 97487