Selecting Finishing Settings - Konica Minolta bizhub c450 Copy Operations

3
3.12

Selecting Finishing Settings

Various settings are available for sorting and finishing copies when they are
fed into the copy exit tray.
The Staple settings are available only if optional finisher FS-603 or finisher
FS-507 is installed.
The Punch settings are available only if optional finisher FS-507 is installed
or punch kit PK-501 is installed on finisher FS-603.
Note
The factory default setting is "Group".
!
Detail
If no finisher is installed and the following conditions are met, printed
copies can be fed out and sorted in an alternating crisscross pattern.
8-1/2 × 11- or 5-1/2 × 8-1/2-size paper is used.
Paper of the same size and type is loaded with the w orientation in one
paper drawer and with the v orientation in another drawer.
The "Auto Paper Select" setting is selected.
The "Auto Paper Select" setting is not selected when the "Mixed Original"
setting is selected.
3-70
Basic Copy Operations
C450