Konica Minolta bizhub c450 Copy Operations page 231

4
Can the specified settings for a copy program be checked?
?
% To check the programmed copy settings, touch the button for the
desired copy program, and then touch [Check Job]. For details, re-
fer to "Copying With Programmed Copy Settings (Mode Memory)"
on page 4-14.
How is a job deleted?
?
% Touch the button for the desired copy program, and then touch
[Del.]. In the screen that appears, requesting confirmation to delete
the copy program, touch [Yes] to delete the selected copy program.
6
Touch [OK] or [Cancel].
– To return to the Basic screen, press the [Mode Memory] key.
!
Detail
Copy programs cannot be changed.
If a copy program is selected where the "Restrict Access to Saved Pro-
gram Jobs" parameter has been set, [Edit Name] and [Del.] do not ap-
pear. For details, refer to "System Setting" on page 12-26.
!
Detail
To stop registering the program, press the [Reset] key or the [Mode Mem-
ory] key.
No matter which screen is displayed, the registration is cancelled.
Otherwise, continue to touch [Cancel] until the Basic screen is displayed.
4-12
Additional Copy Operations
C450