Konica Minolta bizhub c450 Copy Operations page 516

Utility
Parameter
Select Tray when APS
OFF
Select Tray for Insert
Sheet
Print Setting for
Separate Scan
Print Jobs During Copy
Operation
Note
If the "Administrator Security Level" parameter in Administrator mode
was set, [Auto Zoom (Platen)], [Auto Zoom (ADF)], [Select Tray when APS
OFF], and [Select Tray for Insert Sheet] do not appear.
If the "Administrator Security Level" parameter in Administrator mode
was set to "Level 2", [Print Jobs During Copy Operation] does not ap-
pear.
!
Detail
For details on the "Administrator Security Level" parameter, refer to "Se-
curity Setting" on page 12-40.
C450
Description
Select which paper drawer is selected
when the "Auto Paper Select" setting is
canceled.
• Tray Before APS ON:
The paper drawer that was being
used before the "Auto Paper Select"
setting was selected is selected.
• Default Tray:
The 1st drawer is used.
Select the default paper drawer loaded
with paper for the cover pages, inserted
pages and chapter title pages.
Select whether copies are printed as the
document is being scanned or after the
entire document has been scanned
when scanning a document in separate
batches or when scanning a multiple-
page document from the original glass.
• Auto Print:
Printing of copies that can be printed
begins while the document is being
scanned.
• Batch Print:
Printing begins after all pages of the
document have been scanned.
Select whether or not print data or fax
data can be accepted for printing while a
copy operation is being performed.
• Accept:
Print data and fax data can be
accepted and printed.
• Receive Only:
Print data and fax data is printed after
the copy operation is finished.
12
Default Setting
Tray Before APS ON
Tray 2
Auto Print
Accept
12-23