Konica Minolta bizhub c450 Copy Operations page 83

2
No. Part Name
1 Exit tray 1
2 Upper door
3 Horizontal transport unit cover
4 Hole-punch waste container
5 Misfeed-clearing guide
6 Right-side door
7 Exit tray 2
8 Misfeed-clearing dial in folding
section
9 Staple cartridge holder
10 Misfeed-clearing dial 1
11 Misfeed-clearing dial 2
12 Stapler unit
13 Front door
14 Punch kit*
* Parts marked with an asterisk (*) are installed within the finisher and therefore are not shown in
the illustration.
2-14
Before Making Copies
Description
Collects printed pages
Opened when clearing paper misfeeds (See
p. 5-36.)
Opened when clearing paper misfeeds from the
horizontal transport unit (See p. 5-36.)
Removed when emptying hole-punch waste that
has accumulated from using the Punch settings
(See p. 9-33.)
Opened when clearing paper misfeeds within the
finisher (See p. 5-36.)
Opened when clearing paper misfeeds within the
finisher (See p. 5-36.)
Collects copies printed using the "Fold & Staple"
setting
Turned when clearing paper misfeeds in the folding
section (See p. 5-36.)
Removed from the stapler unit when clearing
jammed staples or replacing the staple cartridge
(See p. 9-14, p. 9-23.)
Turned when clearing paper misfeeds within the
finisher (See p. 5-36.)
Turned when clearing jammed staples or replacing
the staple cartridge, or for moving the staple
cartridge holder out to the front (See p. 9-23.)
Pulled out when clearing jammed staples or
replacing the staple cartridge (See p. 9-14,
p. 9-23.)
Opened when clearing paper misfeeds or jammed
staples or when replacing the staple cartridge (See
p. 9-14, p. 9-23.)
Punches holes for filing printed pages when punch
kit PK-501 is installed onto finisher FS-603
C450