Konica Minolta bizhub c450 Copy Operations page 146

Basic Copy Operations
6
Press the [Start] key.
– If the "Print Setting for Separate Scan" parameter is set to "Batch
Print", touch [Print] or press the [Start] key.
– If the "Print Setting for Separate Scan" parameter is set to "Batch
Print", the copy settings can be changed. To change the copy set-
tings, touch [Change Setting], and then touch [OK] after changing
the settings as desired. Otherwise, touch [Cancel Change] to can-
cel the changes to the settings.
C450
3
3-15