AirSep NewLife Elite Service Manual page 43

NewLife Elite Service Manual
®
6.4 Tool Kit and Pressure Test Gauge
The tools needed for you to properly service the NewLife unit are listed below:
Large pliers, wire cutters, needle-nose pliers, slotted-head screwdriver, Phillips-
head screwdriver, ratchet, 8-inch adjustable wrench, 1-inch deep well socket,
9/16-inch socket, 2-inch extension, 7/16-inch combination wrench, 9/16-inch
combination wrench, and 5/8-inch combination wrench.
In addition, channel locks and a small slotted-head screwdriver may be recom-
mended for some service procedures.
A pressure test gauge to read operating system pressures on the NewLife unit
should be kept available at all times.
6-7
AirSep Corporation
®