Recording Setup - Panasonic HC-X1000 Operating Instructions Manual

Recording Setup

All default settings are indicated with underlined text.
MENU
: [RECORD SETUP] # desired setting
[MEDIA SELECT]
[SD CARD 1] and [SD CARD 2] can be selected separately to record motion pictures or still
pictures. (l 30)
[REC MODE]
Switch the recording mode of the motion pictures to record.
*
[MOV(LPCM)] :
*
[MP4(LPCM)] :
*
[MP4] :
[AVCHD]:
* It is not compatible with motion pictures recorded in AVCHD.
[REC FORMAT]
Switch the picture quality of the motion pictures to record.
Depending on the settings of [SYSTEM FREQ]
[REC FORMAT] settings differ.
∫ How to read a [REC FORMAT] setting
Items that make up a [REC FORMAT] setting represent Size, Frame rate, and Bit rate. (Excluding
the [REC FORMAT] settings that are available when [REC MODE] is set to [AVCHD])
4K / 50p 150M
 
≥ Smoother motion picture can be recorded with the higher value for the frame rate. [i] and [p] of the
frame rate means interlace and progressive respectively.
Interlace (interlacing scanning)
Video signal that divides the effective scanning lines to half and send them alternatively
Progressive (progressive scanning)
High density video signal sending the effective scanning lines simultaneously (It will be higher
quality image than the interlace)
This recording method is suitable for editing images.
This MP4 recording method is suitable for editing images.
This recording method is suitable for playback and editing on a PC.
This recording method is suitable for playback on a high-definition TV.

(l 159) and [REC MODE], the available
A Size
B Frame rate
C Bit rate
- 139 -