Panasonic HC-X1000 Operating Instructions Manual page 133

≥ This function's default setting is [SCENE1].
≥ It is possible to switch the scene file by touching
(l 75)
≥ It will return to the default settings when [SCENE] is selected in [INITIAL SET].
[DETAIL LEVEL]
Adjusts the level of the image outline correction.
≥ Switch to Manual Mode.
1 Touch [DETAIL LEVEL].
2 Touch /
3 Touch [EXIT] to exit the menu screen.
[V DETAIL LEVEL]
Adjusts the degree of vertical outline correction in images.
≥ Switch to Manual Mode.
1 Touch [V DETAIL LEVEL].
2 Touch /
3 Touch [EXIT] to exit the menu screen.
[DETAIL CORING]
Adjusts the level to eliminate the noise of the detail.
≥ Switch to Manual Mode.
1 Touch [DETAIL CORING].
2 Touch /
≥ Setting to s direction gives crisp images but allows a slight increase in noise. Setting in the r
direction reduces noise.
3 Touch [EXIT] to exit the menu screen.
[CHROMA LEVEL]
Adjusts colour density.
≥ Switch to Manual Mode.
1 Touch [CHROMA LEVEL].
2 Touch /
3 Touch [EXIT] to exit the menu screen.
[CHROMA PHASE]
Adjusts colour balance.
≥ Switch to Manual Mode.
1 Touch [CHROMA PHASE].
2 Touch /
3 Touch [EXIT] to exit the menu screen.
(l 34)
to adjust settings.
(l 34)
to adjust settings.
(l 34)
to adjust settings.
(l 34)
to adjust settings.
(l 34)
to adjust settings.
to while displaying the operation icons.
SCN1 SCN6
- 133 -
(l 160)