Resuming The Previous Playback; Playing Back Scenes Or Still Pictures By Date - Panasonic HC-X1000 Operating Instructions Manual

Resuming the previous playback

If playback of a scene was stopped halfway, the playback can be resumed from where it was
stopped.
MENU
: [VIDEO SETUP] # [RESUME PLAY] # [ON]
If playback of a motion picture is stopped,
scene.
≥ The memorised resume position is cancelled if you turn off the unit or press the THUMBNAIL
button. (The setting of [RESUME PLAY] does not change.)

Playing back scenes or still pictures by date

The scenes or still pictures recorded on the same day can be played back in succession.
1
Touch the date select icon.
2
Touch the playback date.
The scenes or still pictures recorded on the date selected are displayed as thumbnails.
3
Touch the scenes or still picture to be played back.
≥ If you press the THUMBNAIL button to switch between Recording Mode and Playback Mode, the
thumbnails of all scenes will be displayed.
≥ In cases such as those described below, scenes and still pictures are grouped separately on the
date list, and –1, –2... may be added after the date:
j When the number of scenes exceeds 99
j When the number of still pictures exceeds 999
j When you change the [REC FORMAT] setting
j When you set [REC MODE] to [AVCHD] and set Time Lapse Recording to an option other than
[OFF]
j When you set [REC MODE] to [MOV(LPCM)], [MP4(LPCM)] or [MP4] and change the system
frequency
j When [NUMBER RESET] is performed
appears on the thumbnail view of the stopped

A Date select icon
- 86 -
4K 4K 4K
4K 4K 4K
4K 4K 4K