Remote Operation; Preparations Before Using Remote Operation - Panasonic HC-X1000 Operating Instructions Manual

Wi-Fi

Remote operation

Using a smartphone, you can perform record operations from a remote location.
A When connecting directly to a smartphone
B When connecting to a wireless access point
≥ You need to turn on the Wi-Fi function of your smartphone.
≥ Refer to [Help] in the "Image App" menu about function of Image App.
Caution:
Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject when you use
this function. Use at your own risk.
∫ Remote operation range
The distances in which you can operate this unit remotely from a smartphone with a direct Wi-Fi
connection are as follows:
j Indoors: within approximately 10 m
j Outdoors: within approximately 6 m
≥ Depending on your smartphone and the radio wave conditions, you may not be able to operate
this unit remotely.

Preparations before using remote operation

1 Install the smartphone application "Image App" on your smartphone.
2 Check if the smartphone is an Android (NFC-compatible), Android (non-NFC-
compatible), or iOS device.
≥ If your smartphone is NFC-compatible, a message asking you to touch the NFC mark on the
device will be displayed when starting up the "Image App".
3 Register [Wi-Fi] to a USER button.
≥ Please refer to page 61 for details about setting the USER button.
(l 61)
- 113 -
Image App
Image App
(l 119)