Protecting Scenes/Still Pictures - Panasonic HC-X1000 Operating Instructions Manual

2
(When [MULTI] is selected in Step 1)
Touch the scene/still picture to be deleted.
≥ When touched, the scene/still picture is selected and the
Touch the scene/still picture again to cancel the operation.
≥ Up to 99 scenes can be selected to be deleted.
(When [SINGLE] is selected in Step 1)
Touch the scene/still picture to be deleted.
3
(When [MULTI] is selected in Step 1)
Touch [Delete].
≥ To continuously delete other scenes/still pictures, repeat Steps 2-3.
When you stop deleting halfway:
Touch [CANCEL] or press MENU button while deleting.
≥ The scenes or still pictures that have already been deleted when the deletion is cancelled cannot
be restored.
To complete editing:
Touch [Return] or press MENU button.
≥ Scenes/still pictures that cannot be played back (the thumbnails are displayed as
be deleted.
≥ In case of [ALL SCENES], the deletion may take time if there are many scenes or still pictures.
≥ If you delete scenes recorded on other products or still pictures conforming to DCF standard with
this unit, all the data related to the scenes/still pictures may be deleted.
≥ When still pictures recorded on an SD card by other products are deleted, a still picture (other
than JPEG) that cannot be played back on this unit, may be erased.

Protecting scenes/still pictures

Scenes/still pictures can be protected so that they are not deleted by mistake.
(Even if you protect some scenes/still pictures, formatting the media will delete them.)
≥ Press the THUMBNAIL button to switch this unit to the Playback Mode.
1
Select the menu.
MENU
: [VIDEO SETUP] or [PHOTO SETUP] # [SCENE PROTECT]
2
Touch the scene/still picture to be protected.
≥ When touched, the scene/still picture is selected and the
thumbnail. Touch the scene/still picture again to cancel the operation.
≥ Touch [Return] to complete the settings.
indication appears on the thumbnail.
indication appears on the
- 88 -
) cannot
(l 22)