Connecting With A Hdmi Cable - Panasonic HC-X1000 Operating Instructions Manual

∫ To display the on-screen information on the TV
When the menu setting is changed, the information displayed on the screen (operation icon and
Counter display etc.) can be displayed/not displayed on the TV.
MENU
: [DISP SETUP] # [VIDEO OUT OSD] # [ON] or [OFF]
Refer to the following support site for information about Panasonic TVs with an SD card
slot for playing back your pictures.
http://panasonic.net/
≥ You can play back AVCHD scenes and scenes recorded with [REC MODE] set to [MP4].
≥ Some scenes may not be playable depending on the recording format option.
≥ For more information on the playback operations and other details, refer to the operating
instructions for the TV.

Connecting with a HDMI cable

Select the desired method of HDMI output.
MENU
: [AV OUT SETUP] # [HDMI RESOLUTION] # [AUTO]/[2160p]/[1080p]/[1080i]/[720p]/
[DOWN CONV.]
≥ [AUTO] determines the output resolution automatically based on information from the connected
TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method [2160p],
[1080p], [1080i], [720p] or [DOWN CONV.] which enables the images to be displayed on your TV.
(Please read the operating instructions for the TV.)
≥ [DOWN CONV.] will output images in 4:3.
≥ Images may not be displayed on the television for several seconds in some cases, such as when
changing between scenes.
≥ Even if you set [HDMI RESOLUTION] to [1080i], [720p] or [DOWN CONV.], scenes with a
recording format size of C4K (4096k2160) are output in 1080p.
≥ Even if you set [HDMI RESOLUTION] to [2160p], scenes with a recording format picture size of
1920k1080 or below are output in 1080p.
- 92 -