Panasonic HC-X1000 Operating Instructions Manual page 103

1
Connect the AC adaptor (supplied with USB HDD) to the USB HDD.
≥ If you are using a bus-powered or portable USB HDD, this unit can supply power to the USB HDD
by USB Connection Cable (supplied with USB HDD).
2
Connect the AC adaptor to this unit.
≥ Use the AC adaptor to free you from worrying about the battery running down.
3
Turn on this unit, and press the THUMBNAIL button to switch to Playback
Mode.
4
Set [USB MODE] to [HOST].
MENU
: [OTHER FUNCTION] # [USB MODE] # [HOST]
5
Connect this unit to the USB HDD with the USB Connection Cable (supplied
with USB hard disk).
≥ It may take several minutes until the connection is completed.
6
Touch the desired item.
[Simple copy]:
[Copy selected files]:
[Playback from External
Drive]:
[Safe Removal]:
≥ You can perform the following operations by connecting the USB HDD containing scenes and still
pictures copied from this unit to another device.
j Saving the scenes and still pictures on a PC or copying them back from the PC to the USB
HDD. Use HD Writer XE 2.0 to perform these operations.
When the USB HDD is connected to other devices such as Blu-ray disc recorder, a
message prompting to format the USB HDD may display. All the scenes and still pictures
recorded on the USB HDD will be erased if formatted. Do not format as important data will
get erased and it will be impossible to restore.
(l 161)
Copies all scenes and still pictures recorded with this unit that
have not been copied yet.
Allows you to select desired scenes/still pictures, and then
copy. (l 105)
Plays back scenes and still pictures stored in a USB HDD on
this unit. (l 106)
Allows you to safely remove this unit and a USB HDD.
- 103 -
(l 105)