Table of Contents
Advertisement
Item
USER MAIN
Sets the function assigned to the <USER MAIN> button. (page 59)
[SPOT LIGHT], [BACK LIGHT], [ATW], [ATW LOCK], [GAIN:18dB],
[D.ZOOMX2], [D.ZOOMX4], [FBC], [Y GET], [WFM], [F.JOG CT], [PRE REC],
[REC REVIEW], [TEXT MEMO], [SHOT MARK], [SLOT SEL], [A.MONI SEL],
[PC MODE], [UPLINK S/S], [UPLINK SW1], [UPLINK SW2], [PLAYLIST],
[INHIBIT]
USER1
Sets the function assigned to the <USER1> button.
The setting contents are the same as [USER MAIN].
[BACK LIGHT] (page 59)
USER2
Sets the function assigned to the <USER2> button.
The setting contents are the same as [USER MAIN].
[TEXT MEMO] (page 59)
RET SW
Sets the function assigned to the <RET> button of lens.
[PUSH AF], [D.ZOOMX2], [D.ZOOMX4], [ASSIST], [REC REVIEW], [TEXT
MEMO], [SHOT MARK], [INHIBIT]
f The function assigned to the <RET> button does not work when [INHIBIT] is
selected.
WFM
Selects the type of waveform to be displayed on the viewfinder screen when the
<USER> buttons (<USER MAIN>/<USER1>/<USER2>) to which the waveform
monitor function is assigned is pressed.
[WAVE]
[VECTOR]
[WAVE/VECT]
AUTO KNEE SW
Selects the function for the <OUTPUT>/<AUTO KNEE> selector switch.
[DRS]
[ON]
[OFF]
COLOR BARS
Set the color bar to be used.
[AUTO SEL]
[SMPTE]
[FULL BARS]
[RECORDING SETUP] screen
Item
REC FUNCTION
Sets special recording mode. (page 41)
[NORMAL]
[INTERVAL]
[ONE SHOT]
[LOOP]
f It is always set to [NORMAL] when the power is turned on.
ONE SHOT TIME
Sets the recording time of one-shot recording. (page 42)
[1frm], [2frm], [4frm], [8frm], [16frm], [1s]
INTERVAL TIME
Sets the interval time for interval recording. (page 41)
[2frm], [4frm], [8frm], [16frm], [1s], [2s], [5s], [10s], [30s], [1min], [5min],
[10min]
START DELAY
Delays the start of interval recording and one-shot recording approximately one
second.
[ON], [OFF]
Chapter 7 Menu Operations — Menu list
Description of settings
Displays as a waveform.
Displays as a vector.
Changes display in order of [OFF] → [WAVE] → [VECTOR] →
[OFF] each time the button is pressed.
Activates the dynamic range stretcher function when the
<AUTO KNEE> selector switch is set to <ON>. (page 12)
Activates the auto knee function when the <AUTO KNEE>
selector switch is set to <ON>.
Does not activate the auto knee function when the <AUTO
KNEE> selector switch is set to <ON>.
The SMPTE color bar is automatically selected when [SYSTEM
MODE] is set to [1080-59.94i], [1080-23.98PsF], [720-59.94P],
or [480-59.94i]. The full color bar is automatically selected when
[SYSTEM MODE] is set to [1080-50i], [720-50P], or [576-50i].
Displays the SMPTE color bar.
Displays the full color bar.
Description of settings
Does not perform special recording.
Sets interval recording.
Sets one-shot recording.
Sets loop recording.
– 124 –
Remark
f [SPOT LIGHT] and [BACK LIGHT] functions
do not work when the remote control unit
(AJ-RC10G) or the extension control unit
(AG-EC4G) is connected.
f When the dynamic range stretcher function is
activated, the digital zoom function is disabled.
f The [UPLINK S/S], [UPLINK SW1], and [UPLINK
SW2] functions are available when the Upgrade
Software Key AG-SFU603G (UPLINK device
control function (extra-cost option)) is installed.
Items are grayed out and cannot be selected
when it is not installed.
f The [PLAYLIST] function is available when the
Upgrade Software Key AG-SFU604G (Playlist
edit function (extra-cost option)) is installed. Items
are grayed out and cannot be selected when the
board is not mounted.
f When an auto-focus compatible lens is not
attached, the operation is disabled even if [PUSH
AF] is selected.
f [RET SW] assigned with the [ASSIST] function
operates in the same way as <FOCUS ASSIST>
on the camera.
f When 1080i and progressive mode are set, the
dynamic range stretcher function is not activated
even if [DRS] is selected, and the auto knee
function activated when [ON] is selected operates.
f When the dynamic range stretcher function is
activated, the digital zoom function is disabled.
indicates factory setting values.
Remark
f This setting is not available in the following cases:
- The [REC SIGNAL] item is set to [SDI IN].
- Native recording is set with the [REC FORMAT]
item.
- The [SYSTEM MODE] item is set to
[1080-59.94i] or [480-59.94i], and the [CAMERA
MODE] item is set to [24P] or [24PA].
- Clip connection is underway with one-clip
recording.
- The [VFR] item is set to [ON].
f This setting is available only when the [REC
FUNCTION] item is set to [ONE SHOT].
f This setting is available only when the [REC
FUNCTION] item is set to [INTERVAL].
f This setting is available only when the [REC
FUNCTION] item is set to [INTERVAL] or [ONE
SHOT].
indicates factory setting values.
Advertisement
Table of Contents
