Setting Up A Wi-Fi Connection; Using The Network Easy Setup To Set Up A Connection - Panasonic HC-X1000 Operating Instructions Manual

Wi-Fi

Setting Up a Wi-Fi Connection

To use the Wi-Fi function, connect this unit to a wireless access point or smartphone via Wi-Fi.
∫ About the connection status icon when connected to Wi-Fi

Using the Network Easy Setup to set up a connection

With the smartphone application "Image App", you can transfer the following information between
the smartphone and this unit by using the NFC or QR code function.
With Network Easy Setup, you can set the following information:
≥ Clock information (synchronising the clock information with that of the smartphone)
≥ Information on wireless access points (SSIDs and Passwords)
≥ Install the smartphone application "Image App" on your smartphone.
≥ Register [Wi-Fi] to a USER button.
If the device is Android (NFC-compatible)
≥ Set the NFC function of the smartphone to ON.
1
Press the USER button to which [Wi-Fi] is registered, and turn on the Wi-Fi
function.
2
Select the menu.
MENU
: [Wi-Fi Setup] # [Wi-Fi Easy Setup]
≥ Touch [YES].
3
Start up the smartphone application "Image App".
4
Touch the smartphone on
≥ Touch the NFC mark while a message asking you to touch the NFC mark on the device is
displayed on the smartphone screen.
≥ If this is the first time the smartphone is connecting to this unit, touch [YES] on the screen of this
unit, and then touch the smartphone on
≥ When the connection is complete, the setup screen is displayed on the smartphone.
A The connection status icon
When connected to wireless access point:
connected to Wi-Fi/
≥ The display will change as follows according to the
radio wave intensity:

(Strong).
When directly connected:
connected to Wi-Fi/
(l 61)
of this unit.
of this unit again.
- 120 -
not connected to Wi-Fi
(Weak) # #
not connected to Wi-Fi
#