Panasonic HC-X1000 Operating Instructions Manual page 78

To change the function you adjust
1 Change settings in advance so that you can select more than two functions.
≥ Change settings as follows:
Functions
Gain adjustment
White Balance
Shutter speed
Area Mode
Focus Assist
Headphone Volume Adjustment Connect headphones to this unit.
≥ The on-screen icon for the selected function is displayed in white. (Function Execution Mode)
If you have selected [
icon.
2 Push the multi-function dial.
≥ The on-screen icon turns yellow. (Function Selection Mode)
3 Rotate the multi-function dial to select the function you want to adjust, and
press the multi-function dial to set the selection.
≥ The on-screen icon for the selected function turns white. (Function Execution Mode)
≥ You can rotate the multi-function dial to adjust the setting of the selected function.
∫ Headphone Volume Adjustment
Adjust the volume of the headphone while recording.
≥ Set [VOLUME] to [ON].
1 Connect headphones to the headphone
terminal.
2 Rotate the multi-function dial to adjust the
volume.
≥ Actual volume to be recorded does not change.
3 Push the multi-function dial to
.
adjustment
≥ You can also adjust the volume by touching
after the adjustment allows you to exit the setting.
Press the GAIN button to enable Manual Gain Mode.
Press the W.B. button to enable Manual White Balance
Mode. (l
Press the SHUTTER button to enable Manual Shutter Mode.
(l 51)
Press the applicable USER button to enable Area Mode.
(l 68)
Set [FOCUS ASSIST] to [EXPAND] or [BOTH], and press
the applicable USER button to enable Focus Assist.
ICONS], you can rotate the multi-function dial to select an operation
(l 157)
finish the
- 78 -
Settings to be changed in advance
46)
/ in Step 2. Not performing touch operations

[VOLUME]
A
(l 49)
(l 40)