Table of Contents
Advertisement
*
Note: Refer also to the instructions included with the aftermarket radio.
NOTE: XL-7 ONLY
Trim top corners of radio housing.
(Figure A)
A
1
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs down. (Figure B)
2
Slide the aftermarket radio into the
cage and secure. (Figure C)
NOTE: XL-7 ONLY
Trim top corners of radio housing.
(Figure A)
A
1
Mount the ISO Brackets to the radio
with the screws supplied with the
unit. (Figure B)
2
Slide the radio into the radio opening
until the side clips engage.) (Figure C)
3
Snap the Trim plate into the Radio
Housing. (Figure C)
Continue to final assembly.
99-3305 KIT ASSEMBL Y
DIN RADIO PROVISION
ISO RADIO PROVISION
B
C
B
C
9
Advertisement
Table of Contents
