Din Radio Provision With Pocket - Metra Electronics 95-5812 Installation Manual

1. For the Ford Freestar 2004-2007, Mercury Monterey
2004-2007, Ford Focus 2005-2007, and the Ford
F Series Super Duty 2005-up, slide the included
brackets onto the sides of the radio housings pocket
from the back of the housing forward. (Figure A)
If your vehicle is not listed above do not use brackets
and move to step 2.
2. Attach the included spacers to the back of the radio
housing mounting tabs. (Figure B)
Note: Use the screws supplied with this kit to
mount the radio housing in the vehicles that require
the spacers. Not all vehicles will require spacers.
3. Locate the factory wiring harness in the dash. Metra
recommends using the proper mating adapter from
Metra or AXXESS. Re-connect the negative battery
terminal and test the unit for proper operation.
4. Slide the DIN cage into the radio housing and secure by
bending the metal locking tabs outward. (Figure C)
5. Slide the aftermarket radio into the cage until it snaps
in place. (Figure D)
6. Reassemble dash in reverse order of disassembly.
Kit Assembly 99-5812

DIN radio provision with pocket

(Figure A)
(Figure C)
12
(Figure B)
(Figure D)