Kit Assembly; Iso Din Radio Provision With Pocket; Iso Ddin Radio Provision - Metra Electronics 99-3307G Installation Instructions Manual

ISO DIN radio provision with pocket

1. Attach the pocket to the radio
brackets using the (4) #8 x 3/8"
Phillips screws provided.
(Figure A)
2. Remove the metal DIN sleeve
and trim ring from the
aftermarket radio.
3. Slide the radio into the bracket/
pocket assembly and then secure
it using the screws supplied with
the radio. (Figure B)
Continue to Axxess
Interface Installation

Kit Assembly

(Figure A)
(Figure B)
99-3307G

ISO DDIN radio provision

1. Attach the radio brackets to the
radio using the screws supplied
with the radio. (Figure A)
Continue to Axxess
Interface Installation
4
(Figure A)