Table of Contents
Advertisement
*
Note: Refer also to the instructions included with the aftermarket radio.
1
Disconnect the negative battery termi-
nal to prevent an accidental short cir-
cuit.
2
Press in on sides of the shifter boot to
release it from the shifter trim panel.
(Figure A)
3
Lift the boot up to access the Allen
screw securing the shifter knob to the
shifter lever. Loosen the Allen screw
and remove the shifter knob.
(Figure B)
4
Remove (1) torx screw from the shifter
trim panel (Figure C), then using a
panel removal tool unsnap the shifter
trim panel. Unplug and remove the
panel. (Figure D)
5
Using a panel removal tool unsnap
the radio trim panel. Unplug and
remove the panel. (Figure E)
6
Remove (4) 9/32" screws securing
the radio. Unplug and remove the
radio.
Continue to kit assembly.
E
99-3305 DASH DISASSEMBL Y
SUZUKI XL-7 2007-09
A
B
C
D
4
Advertisement
Table of Contents
