Replacing consumables
13
Push the imaging unit until it bottoms.
14
Close the front door.
15
Insert the used imaging unit into the empty black
protective bag and box of the new imaging unit.
16
Set the power switch "n".
17
Adjust the image stabilization.
–
For details on adjusting the image stabilization, refer to "Expert Adjustment" on page 8-27.
7 CAUTION
Precautions for toner spills
%
Be careful not to spill toner inside the machine or get toner on your clothes or hands.
%
If your hands become soiled with toner, immediately wash them with soap and water.
%
If toner gets in your eyes, immediately flush them with water, and then seek professional medical
attention.
8650
11
11-13