Konica Minolta magicolor 8650 User Manual page 118

Installing the printer driver for Windows
4
Click "Add a printer" from the toolbar.
The Add Printer window appears.
5
Click "Add a local printer".
The Select a Printer Port dialog box appears.
6
Click "Create a new port", and select the port type.
– When using an LPR/Port9100 connection, select "Standard TCP/IP Port".
– When using an SMB connection, select "Local Port".
7
Click the [Next] button.
8
Specify the IP address and port.
– When using an LPR/Port9100 connection, select "TCP/IP Device", and then enter the IP address.
When both LPR and Port9100 are enabled for this machine, the printer driver and the machine is
connected with LPR.
– When using an SMB connection, enter "\\NetBIOS name\print service name" in the "Enter a port
name" box. Enter the same NetBIOS name and print service name those appear in "Print Setting"
in the SMB Setting screen of this machine.
9
Click the [Next] button.
– If the Additional Port Information Required dialog box appears, go to step 10.
– If the Install the printer driver dialog box appears, go to step 13.
10
Select "Custom", and then click the [Settings] button.
11
Change the settings according to the port, and then click the [OK] button.
– For an LPR connection, select "LPR", and then enter "Print" in the "Queue name" box.
– For a Port9100 connection, select "RAW", and then enter the RAW port number (9100 at default) in
the "Port Number" box.
– The information entered here is case-sensitive.
8650
3
3-21