PageScope Web Connection
9.20.2
NetWare Setting
In Administrator mode of PageScope Web Connection, select the Network tab - "NetWare Setting" -
"NetWare Setting".
Specify the following settings.
Item
IPX Setting
Ethernet Frame Type
9.20.3
TRAP Setting
In Administrator mode of PageScope Web Connection, select the Network tab - "SNMP Setting".
Specify the following settings.
Item
Allow Setting
Trap Setting when Au-
thentication Fails
9.20.4
Status Notification Setting
In Administrator mode of PageScope Web Connection, select the Maintenance tab - "Status Notification
Setting" - "IP (IPX) Address" - [Edit].
For details on the settings, refer to "Status Notification Setting" on page 9-71.
8650
Definition
Select "ON".
Specify the frame type to be used.
Definition
Select "Allow".
Select whether to enable the TRAP function when authenti-
cation failed.
9
Prior confirmation
Frame type
Prior confirmation
9-78