Clearing A Paper Misfeed In The Main Unit - Konica Minolta magicolor 8650 User Manual

Troubleshooting
Reminder
If the paper is misfed as described below, contact your service representative or the manufacturer.
The paper is wrapped around the roller in the fusing unit.
The paper is folded or shredded by the roller in the fusing unit.
The paper that was removed tore and remains in the fusing unit.
Decreased image quality may result if the surface of the transfer belt or transfer roller is touched. Be
careful not to touch the surface of the transfer belt or the transfer roller.
Be careful not to touch the film with your hands.
10.2.3

Clearing a paper misfeed in the main unit

!
Detail
For details on the positions of paper misfeeds, refer to "Paper misfeed indications" on page 10-4.
1
Pull up the upper right-side door release lever, and then
open the upper right-side door.
2
Slowly remove any misfed paper from the main unit.
8650
Transfer
belt
Transfer
roller
10
10-8