Verifying That Self-Test Passed - Paradyne iMarc DSL 9783 Installation Instructions Manual

main
Device Name: Node A
-----------------------------------------------------------------------------
Ctrl-a to access these functions, Shift-r to access the Router's CLI.
If the Main Menu does not appear, recheck the terminal or PC's settings, or press Enter
again. Refer to Troubleshooting in the iMarc SLV Operations Guide for other
explanations.

Verifying that Self-Test Passed

To verify that the unit passed its self-test, go to the System and Test Status screen.
Main Menu → Status → System and Test Status
The results of the self-test appear directly under the screen title.
If any failure messages appear, reset the unit by disconnecting, then reconnecting the
power cord. The unit will perform the self-test again. If the failure reappears, call your
service representative for assistance.
MAIN MENU
Status
Test
Configuration
Control
Easy Install
14
9783-RtrSLV
2/26/2001 00:02
Exit