System And Test Status Messages; Self-Test Results Messages; Last System Reset Date And Time - Paradyne FrameSaver
DSL 9783 User Manual

System and Test Status Messages

Self-Test Results Messages

Last System Reset Date and Time

9783-A2-GB20-00
System and test status information is selected from the Status menu.
Main Menu Status
The following information is included on this screen:
Self-Test Results Messages
Last System Reset Date and Time
Health and Status Messages
Test Status Messages
One of these self-test result messages appear in the Self-Test Results field at the
top of the System and Test Status screen.
Table 6-6. Self-Test Results Messages
Message What It Indicates
Failure xxxxxxxx An internal failure occurred
(xxxxxxxx represents an
8-digit hexadecimal failure
code used by service
personnel).
Record the failure code
before resetting the unit;
otherwise, the error
information will be lost.
Passed No problems were found
during power-on or reset.
This field indicates the last time the FrameSaver unit was reset. It appears after
the Self-Test Results field at the top of the System and Test Status screen.
Date is in mm/dd/yyyy format (month/day/year).
Time is in mm:ss format (minutes:seconds).
System and Test Status
July 2000
Operation and Maintenance
What To Do
1. Record the failure code.
2. Reset the unit.
3. Contact your service
representative.
No action needed.
6-13