Table of Contents
Advertisement
Before you start:
Ensure all power is turned off.
1) Turn the unit off and allow it to cool to room temperature,
2) Unplug or disconnect power source to stove.
3) Open the bottom louvre to access valve.
4) Remove screw in location shown below to release valve cover.
5) Partially lift out valve cover.
Regency IP28 Gas Inbuilt Fireplace
VALVE ASSEMBLY REPLACEMENT
6) Disconnect wires.
6) Disconnect wire harness plug.
7) Remove screw from rectifi er,
8) Unplug rectifi er from valve.
MAINTENANCE
35
Advertisement
Table of Contents
