Table of Contents
Advertisement
INSTALLATION
Before you start: Ensure power is off.
1) Remove the primary guard and faceplate. Unplug polarized plug for the switches.
2) Loosen 14 screws securing the glass retainers.
Remove as many retainers required to either lift or slide the existing glass out. Ensure glass does not dislodge
3) Carefully remove and replace the glass.
4) With new glass installed in correct position, reinstall all glass retainers and screws.
Ensure all screws are tightened to create a proper seal. Do not over tighten.
NOTE: Unit will not operate with glass removed
22
GLASS DOOR INSTALLATION
Regency IP28 Gas Inbuilt Fireplace
Advertisement
Table of Contents
