Default Operation Mode; Unit Of Measurement - Kyocera FS-1118MFP Advanced Operation Manual

System Settings
System Menu/
Counter
or
Common Setting
Enter
or
Default Operat
Enter
System Menu/
Counter
or
Send Setting
Enter
or
Default Dest
Enter
System Menu/
Counter
or
Common Setting
Enter
or
Measurement
Enter
5-2

Default Operation Mode

The default operation mode will determine whether the operation mode that appears
after power is turned on to the machine will be the copy operation mode, the send
operation mode or the status operation mode.
1
Access Default Operat.
If you are unsure how to use this route map refer to Accessing Menu Items on
page vii.
2
Press or
display shows Completed and returns to the Common Setting screen.
Default Send Operation Mode
The default send operation mode will determine whether the send operation mode
displayed when the machine is powered on will be e-mail, SMB, FTP, or FAX. It is
recommended you select the most commonly used mode as the default.
1
Access Default Dest.
If you are unsure how to use this route map refer to Accessing Menu Items on
page vii.
2
Press or
The display shows Completed and returns to the Common Setting screen.

Unit of Measurement

The unit of measurement selected will be used in the custom original size and
custom paper size settings.
1
Access Measurement.
If you are unsure how to use this route map refer to Accessing Menu Items on
page vii.
2
Press or
Completed and returns to the Common Setting screen.
to select the default operation mode and press Enter. The
to select the default operation mode required and press Enter.
to select either Inch or mm and press Enter. The display shows
ADVANCED OPERATION GUIDE