8.5.2
Adjusting the position of the release lever
WARNING: Danger of injury, in case one of the fixation bolts loosens or falls out, as a
result of incorrect assembly!
• The lower nut on the fixation bolt must always be tightened to between 25 and 30 Nm!
Requirements:
• Open-end spanner 13 mm
• Torque spanner 13 mm
•
Loosen the fixation nut (1) of the release lever.
•
Adjust the lever to the desired position.
•
Re-tighten the nut to between 25 and 30 Nm.
56