Base Unit Memory Card - IBM 7012 G Series Service Manual

Base Unit Memory Card

Note: Refer to "Handling Static-Sensitive Devices" on page 4-2 before removing or
installing the CPU card in this system.
Removal
1. Remove the front cover following the procedure on page 4-3.
2. Remove the side cover following the procedure on page 4-6.
3. Put the system unit in a horizontal position.
4. Remove the CPU/Memory cards retainer using the procedure on page 4-22.
5. Unplug the memory card from the system planar. (There are card extractors which must
be used to pull out the card. The extractors are located on the inside of the front cover.
Insert the extractors in the holes placed at the edges of the card.)
4-36
Service Guide