Base Unit Cpu/Memory Card Retainers - IBM 7012 G Series Service Manual

Base Unit CPU/Memory Card Retainers

Note: There are two types of card retainers. One is used when only one CPU card is
installed into the system; the other one must be used when two CPU cards are
installed. Model G40 uses the card retainers for two CPU boards only.
Front Card Retainer for one CPU
board (G30 only)
Rear Card Retainer for one CPU
board (G30 only)
4-22
Service Guide
Front Card Retainer for two CPU
boards (G30 and G40 )
Note The
Difference
Rear Card Retainer for two CPU
boards (G30 and G40 )
Note The
Difference