Table of Contents
Advertisement
Disk Drive
References to the small computer systems interface (SCSI) input/output controller is
abbreviated as SCSI controller in this publication.
Note: Refer to "Handling Static-Sensitive Devices" on page 4-2.
Removal
1. Keep the system unit in vertical position.
2. Remove the front cover following the procedure on page 4-3.
3. Remove the side cover following the procedure on page 4-6.
4. Remove the CPU/Memory retainers using the procedure on page 4-22.
5. Remove the two retaining screws that mount the disk drive support tray to the system
unit frame and remove the support tray.
Retaining
Screw
Support
Tray
6. Disconnect the power supply connectors and the SCSI cable from the drives.
7. Disconnect the internal SCSI cable from the SCSI controller, if necessary.
8. Gently slide the support tray out of the system unit.
4-24
Service Guide
Retaining
Screw
Position D
Position E
Drive Retaining
Screws
Advertisement
Table of Contents
