Konica Minolta bizhub36 Users Manual Network Administration page 266

7
11
Click [Write].
% Data Administrator provides the batch copy function that batch-configures the registered user
data in multiple machines with the authentication unit enabled.
The registered user data is configured in this machine.
12
Click [OK].
13
Disconnect the authentication unit from the USB port of the computer.
14
Turn the Power Switch of this machine off, connect the authentication unit to this machine, and turn
the Power Switch of this machine on.
NOTICE
To turn the Power Switch off and on, first turn the Power Switch off, and then turn it on after 10 or
more seconds has elapsed. Not doing so may result in an operation failure.
When connecting or disconnecting the USB cable, hold the plug. Otherwise, the machine may be dam-
aged or a failure may occur.
7-12
Using authentication unit
bizhub 42/36
7.1