Konica Minolta bizhub36 Users Manual Network Administration page 44

4
Settings
[ARP/PING]
[HTTP]
[FTP]
[Telnet]
[Bonjour]
[Dynamic DNS]
[IPP]
[RAW Port]
[SLP]
[SMTP]
[SNMP]
[WSD Print]
[IPSec]
[IP Address Filter]
[IPv6]
Factory default
[Enable]
[IP Address]
[Subnet Mask]
[Gateway]
[DHCP]
[BOOTP]
[ARP/PING]
[HTTP]
[FTP]
[Telnet]
[Bonjour]
[Dynamic DNS]
4-12
Select whether or not the ARP/PING command is used when the IP ad-
dress is assigned.
If the IP address is manually specified, [ARP/PING] is automatically set to
[OFF].
Select whether or not to enable HTTP.
Select whether or not to enable the FTP server.
Select whether or not to enable Telnet transmissions.
To display the machine as a connected device via Bonjour, select [Enable].
Select [Enable] when automatically registering the host name with the DNS
server that supports the Dynamic DNS function.
To use IPP print, select [Enable].
[Enable] To use RAW port (Port 9100) print, select [Yes].
[Bidirectional] Select whether or not to enable RAW port bidirec-
tional communication.
If the RAW port setting is disabled, this item is not
displayed.
Select whether or not to enable SLP.
Select whether or not to enable E-mail transmission operations for this ma-
chine.
Select whether or not to enable SNMP.
Select whether or not to enable WSD printing.
Select whether or not to enable IPsec.
[Permit Access] Select [Enable] to allow access from certain IP
addresses.
[Deny Access] Select [Enable] to deny access from certain IP ad-
dresses.
[Enable] [ON]: Enable the IPv6 Setting.
[OFF]: Disable the IPv6 Setting. Buttons except
for this one are not displayed.
[Auto Setting] To obtain the IPv6 address automatically, select
[Enable].
[Link Local] Displays the link-local address generated from
the MAC address.
[Global Address] Displays the global address.
[Gateway Address] Displays the gateway address.
[ON]
[0.0.0.0]
[0.0.0.0]
[0.0.0.0]
[ON]
[OFF]
[OFF]
[Enable]
[Enable]
[Enable]
[Enable]
[Disable]
[Ethernet] 4.5
bizhub 42/36