Openapi Settings] - Konica Minolta bizhub36 Users Manual Network Administration

5.7 [Network] tab
5.7.16

[OpenAPI Settings]

Configure the settings for OpenAPI function.
Select [Network] ö [OpenAPI Settings] ö [OpenAPI Settings].
Item
[OpenAPI]
[Port Number]
[SSL/TLS]
[Port Number (SSL/TLS)]
[Authentication]
[Login Name]
[Change Password]
[Password]
bizhub 42/36
Description
Select whether or not OpenAPI is used.
Enter a port number.
The currently used port number cannot be specified.
Select whether or not SSL/TLS is used.
You can configure this setting if device certificate(s) is registered in [Secu-
rity] ö [PKI Settings] ö [Device Certificate].
Enter the port number to be used for SSL communication.
The currently used port number cannot be specified.
Select whether or not to perform OpenAPI authentication.
Enter the login name used with OpenAPI authentication (up to 8 charac-
ters, excluding symbols).
Select this check box to change the password.
Enter the password used with OpenAPI authentication (up to 8 characters,
excluding symbols).
5
5-143