Konica Minolta bizhub36 Users Manual Network Administration page 115

5.2 [Security] tab
Item
[Account Track Method]
[Synchronize User Authen-
tication & Account Track]
[Number of Counters As-
signed for Users]
[Print without Authentica-
tion]
If Enhanced security mode is enabled, restriction is applied as follows.
- You cannot select [Off] in [User Authentication].
- You cannot select [Allow] and [Allow (without Login] in [Public Access].
- You cannot select [Allow] in [Print without Authentication].
bizhub 42/36
Description
To use the account track function, select its authentication method.
This setting is required when you only use the account track function.
To synchronize user authentication with account track and manage users
for each account track, select [Synchronize].
Once you specify the account name of the user at user registration, you will
be able to log in by entering only the user name. If you have omitted the
account name, the user must specify the account name when logging in
for the first time. The account name that the user specify at the first login
time will be registered as the account name of the user.
This setting is required when set [ON] for [Account Track] when select [De-
vice] or [External Server] from [User Authentication].
Enter a number of user counters to be assigned if user authentication and
account track are enabled.
You can aggregate the counter by user or account track, and assign up to
1,000 counters to users and account tracks. For example, if the number of
user counters to be assigned is set to 950, you can register up to 50 ac-
count tracks.
This setting is required when set [ON] for [Account Track] when select [De-
vice] or [External Server] from [User Authentication].
Select the way in which the machine functions when it receives a job with-
out authentication information (a print job sent with user authentication or
account track disabled in the printer driver) or a public user job.
[Allow]: Select this option to print the received job.
[Restrict]: Select this option to delete the received job.
This setting is required when select [Device] or [External Server] from [User
Authentication].
5
5-21