Hi-Fi Audio Recording Level Control - JVC HR-S7300U Instructions Manual

+
–
1 2 3
4 5 6
7 8 9
0
POWER
REW
Hi-Fi Audio Recording Level
Control
Your VCR allows manual adjustment of the Hi-Fi audio
recording level. Although the preset audio recording level is
satisfactory for normal recording, if the sound you are going to
record is too loud or too low, adjust the audio recording level
while referring to the VCR's audio level meters.
TURN ON THE VCR
1
Press POWER.
ACCESS MAIN MENU
SCREEN
2
Press MENU as many times as necessary.
ACCESS FUNCTION SET
SCREEN
MENU
3
Press SET +/– to place the arrow next to "FUNCTION
SET", then press SELECT.
SET
ACCESS HI-FI REC LEVEL
SCREEN
4
Press SET +/– to place the
arrow next to "HI-FI REC
LEVEL", then press SELECT.
FF
SELECT MODE
5
Place the arrow next to
"MANUAL" by pressing
SET +/–.
ADJUST AUDIO RECORD-
ING LEVEL
6
Press FF or REW.
AUTO TIMER
SUPERIMPOSE
2ND AUDIO
AUDIO MONITOR
TAPE DUB MODE
SPECIAL FUNCTION
=HI-FI REC LEVEL
PRESS (SELECT, SET+/–)
PRESS (MENU) TO END
HI-FI REC LEVEL CONTROL
PRESS
(REW)
PRESS (SET+/–) FOR CHOICE
PRESS (MENU) TO END
To move the on-screen's audio levels by one division
of the scale, press FF or REW briefly for 5 times in
succession. To move the audio levels faster, keep FF
or REW presssed.
Adjust the recording level so that the audio level
meters reach from 0dB to 4dB at the maximum sound
volume.
CONTINUED ON NEXT PAGE.
37
FUNCTION
PRESET
=MANUAL
PRESS
(FF)
MIN------ * ------MAX