Recording; Record One Program While; Watching Another; Display Elapsed Recording Time - JVC HR-S7300U Instructions Manual

Recording

+
–
1 2
4 5
7 8
0
OSD
TV/VIDEO
S-VHS indicator
3
6
9
C.RESET

Record One Program While

Watching Another

ENGAGE TV MODE
1
During recording...
Press TV/VIDEO. The VCR's VIDEO indicator goes
out. (If you are using the RF connection (
view the output from your VCR, the TV broadcast
being recorded disappears.)
If you are using the AV connection (
VIDEO connection (
from your VCR, change the TV's input mode from AV
to TV.
SELECT CHANNEL FOR
VIEWING
2
Use the TV's channel selector to set the channel you
want to watch.
Display Elapsed Recording
Time
RESET COUNTER TO ZERO
1
Before recording starts, press C.RESET. The counter
resets to zero and displays the exact elapsed time as the
tape runs.
DISPLAY ELAPSED TIME ON
SCREEN
2
During recording, press OSD at any time to see the
elapsed time. All indications corresponding to the
current status of the VCR are displayed for 5 seconds.
The counter display remains on the screen indicating the
elapsed time. Press OSD again to remove the display.
Make sure "SUPERIMPOSE" is set to "ON" (
The indications are not be recorded.

S-VHS (Super VHS) and VHS

Your VCR can record in either S-VHS or VHS.
To record in S-VHS, insert a cassette marked "S-VHS".
The S-VHS indicator will light and the S-VHS recording
mode is automatically selected.
To record in VHS, insert a cassette marked "VHS". The
VHS recording mode is automatically selected.
You can also record in VHS on S-VHS cassettes. To do
this, after inserting an S-VHS cassette, press the S-VHS
button. The S-VHS indicator will go out.
35
pg. 6). to
pg. 6) or S-
pg. 7), to view the output
pg. 30).