Auto Timer - JVC HR-S7300U Instructions Manual

+
–
1 2 3
4 5 6
7 8 9
0
TIMER

Auto Timer

When the Auto Timer is set to ON the timer is automatically
engaged when the VCR's power is turned off and automatically
disengaged when the VCR is powered back on.
ACCESS MAIN MENU
SCREEN
1
Press MENU as many times as necessary.
ACCESS FUNCTION SET
SCREEN
2
Place the arrow next to "FUNCTION SET" by pressing
SET +/–, then press SELECT.
ACCESS AUTO TIMER
SCREEN
3
Place the arrow next to "AUTO TIMER" by pressing SET
+/–, then press SELECT. Now skip to step 2 of the
MENU
procedure below.
SET
Or, during on-screen timer programming ...
ACCESS AUTO TIMER
SCREEN
1
In step 7 in the VCR Plus+ Timer Programming proce-
dure (
Programming procedure (
SELECT MODE
2
Place the arrow next to
your choice ("ON" or
"OFF") by pressing SET +/–.
RETURN TO NORMAL
SCREEN
3
Press MENU as many times as necessary.
NOTE:
For safety, when AUTO TIMER is set to "OFF", all other VCR
functions are disabled while the Timer mode is engaged. To
disengage the timer, press TIMER.
pg. 41) or in step 7 in the On-Screen Timer
pg. 43), press MENU.
AUTO TIMER
=ON
OFF
PRESS (SET+/–) FOR CHOICE
PRESS (MENU) TO END
45