Set Cable Box Brand - JVC HR-S7300U Instructions Manual

18
+
–
1 2
4 5
DIGIT
7 8
0
ENTER
3
6
MENU
9
SET
INITIAL SETTINGS (cont.)
SELECT CABLE BOX
OUTPUT CHANNEL
6
Your selection depends on
how your cable box is
connected to your VCR.
If your cable box is
connected to your VCR
using an RF connection . . .
. . . press SET+/– to place
the arrow next to the
channel number representing the cable box's output (2–
6).
If your cable box is connected to your VCR's AUDIO/
VIDEO IN connectors . . .
. . . press SET+/– to place the arrow next to "ON
LINE".
RETURN TO CABLE BOX
SET SCREEN
7
Press MENU.

Set Cable Box Brand

TURN ON CABLE BOX
1
Select a channel other than channel 9 on your Cable
Box.
ACCESS BRAND SET
SCREEN
2
At the Cable Box Set
screen, press SET +/– to
place the arrow next to
"BRAND SET", then press
SELECT.
ENTER CABLE BOX BRAND
3
Press the appropriate
DIGIT keys to enter the
Cable Box Code from the
CABLE BOX BRAND LIST
on page 19, then press
ENTER.
If the cable box's
channel changes to 9,
setting is complete.
If there are more than one code number listed for
your brand of cable box, repeat step 3 until the cable
box's channel changes to 9.
If you go through all listed code numbers and the
channel doesn't change, try all other numbers
between 1 and 69. That is because, maybe, your
cable box model is not listed.
CABLE BOX OUTPUT
=OFF
ON CH2
ON CH3
ON CH4
ON CH5
ON CH6
ON LINE
PRESS (SET+/–) FOR CHOICE
PRESS (MENU) TO END
CABLE BOX SET
CABLE BOX OUTPUT
=BRAND SET
PRESS (SELECT, SET+/–)
PRESS (MENU) TO END
CABLE BOX BRAND
1
SELECT BRAND NO. AND
PRESS (ENTER)
PRESS (MENU) TO END