Hi-Fi Audio Recording Level Control - JVC HR-S7600U Instructions Manual

44
EN
1
4
7
1
MENU
HR-S7600U-EN24-44
PLAYBACK AND RECORDING FEATURES (cont.)
JOG
OK SHATTLE
2 3
2
5 6
8 9
0
4
OK
TIME SCAN
44
Hi-Fi Audio Recording Level
Control
Your VCR allows manual adjustment of the Hi-Fi audio
recording level.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS HI-FI REC LEVEL
CONTROL SCREEN
2
Press CH 5∞ or TIME SCAN %fi to move the highlight
bar (arrow) to "HI-FI REC LEVEL CTL", then press OK or
#
TIME SCAN .
ADJUST AUDIO
RECORDING LEVEL
3
Press TIME SCAN % or fi.
To move the on-screen's
audio levels by one
division of the scale,
press TIME SCAN % or
TIME SCAN fi briefly for
5 times in succession. To
move the audio levels
faster, keep TIME SCAN % or TIME SCAN fi
presssed.
Adjust the recording level while watching the VCR's
audio level meters. Set the level so that maximum
volume causes the meters to vary between 0dB to 4dB.
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
Noise will increase if the recording level is too low, while
distortion will increase if the level is too high.
When you finished HiFi Audio recording, be sure to set the
level control back to its center position.
99.4.28, 2:03 PM
HI-FI REC LEVEL CONTROL
MIN------ + ------MAX
PRESS (5, ∞), THEN (OK)
PRESS (MENU) TO END