Dynamic Contrast; Video Stabilizer - JVC HR-S7300U Instructions Manual

28
+
–
1 2
4 5
7 8
0
PLAYBACK AND RECORDING FEATURES (cont.)
3
6
9

Dynamic Contrast

Use this function to improve contrast which tends to degrade
specially with wide-screen pictures.
ENGAGE DYNAMIC CON-
TRAST MODE
1
During playback, press DYNAMIC CONTRAST on the
VCR.
The button will light up.
DISENGAGE DYNAMIC
CONTRAST MODE
2
Press DYNAMIC CONTRAST again.
The button's light will go out.
NOTES:
Turn on/off as preferred.
The setting will remain effective even after you turn the VCR
off and on again.

Video Stabilizer

You can correct vertical vibration when playing back EP
recordings. When this function is set to "ON", vertical vibration
will be automatically corrected. This function will automatically
turn "OFF", when the VCR's power is turned off and on again,
or when a cassette is newly inserted.
ENGAGE VIDEO STABI-
LIZER MODE
1
During playback, press VIDEO STABILIZER on the
VCR. "VIDEO STABILIZER" and its current setting
("OFF") will appear on screen. While "OFF" is dis-
played, press VIDEO STABILIZER again to select "ON".
This function has no effect with SP recordings, during
recording and during special-effects playback.
"SUPERIMPOSE" must be set to "ON", otherwise you
cannot select "ON" or "OFF" for this function. (
30).
pg.